Motorcycle Whitewall Tyre Inserts - 19"

These 30 mm Wide Motorcycle Whitewalls are fairly easy to install in your own garage with a few basic tools.  Add a truly custom look to your bike without having to replace your tyres.  Product sold is for two white walls which is enough for one tyre.  And before you ask - yes these are road legal!

You will need:

• Tyre Levers and/or rim protectors
• An air pump or compressor
• Clean gloves and a clean cloth

Installation Steps:

1. Remove wheel from bike, deflate tyre and break bead with tyre levers on 1 side of the tyre.
2. Clean with thinners or prepsol the inside of the rim and the side of the tyre from the rim egde to the tread. 
3. Insert whitewall & try to centre it nicely, add just enough air so that the bead pops back in but dont inflate much pressure into the tyre. 
4. Lay tyre down and add more air (14-18 PSI). With your clean gloves on palm the whitewall gently into the position of where you want it.
5. Slowly fully inflate tyre, constantly checking and palming down the whitewall into position.
6. Flip the tyre over onto a clean matt (whitewall down) & repeat the entire process for the other side.